SmallRig 5490 Camera Battery Charger for LP-E6P

SmallRig 5490 Camera Battery Charger for LP-E6P

This charger is designed for LP-E6P, LP-E6NH, LP-E6N and LP-E6 batteries, supporting both original and third-party versions. It features two charging slots that can charge two batteries simultaneously in approximately 2 hours. The unit weighs 55 g.

Each channel has a rated output of 8,4 V/1 A. Via USB-C, the charger accepts 5 V/2,4 A, 9 V/2 A, 12 V/1,75 A or 15 V/1,5 A with a maximum power of 22,5 W and support for PD3.0, QC2.0 and QC3.0 protocols. A power adapter with an output of 22,5 W or higher is recommended, as it is not compatible with 5 V/1 A adapters. When using a 5 V/2,4 A adapter, a slow charging mode is activated where channel 1 is prioritised over channel 2. The USB-C input allows for use with wall adapters, car chargers and power banks.

Indication and safety

Five LED indicators per channel show the power level in 20 % increments, and a red warning light illuminates when the battery level is critically low. Built-in circuits monitor temperature and voltage to protect against overheating and overvoltage. Charging slows down during overheating and power is cut completely during overvoltage. Maintenance charging is used when the battery is nearly full to preserve battery health.

Included is a 60 W USB-C to USB-C cable of 1 metre.